Hakko Special Offer Fall 2015

Hakko Special Offer Fall 2015

While watching the falling leaves, Hakko Special Offer for the fall of 2015 provides a last opportunity for our customers to purchase the FR-801 analogue hot air rework system for a bargain price. These are the last pieces of this popular product, available for their devoted users.

As besides the changing of the nature, fall is also the season of hard work, the other item of our Special Offer addresses those who need a highly reliable, long lasting, all-around soldering station, may get now the compact FX-951, which,with its choice of over 80 tip geometries, that can tackle almost any soldering application from a production or reparing process.

Our special offer is valid until the stocks lasts. Should you need any details, just send us your questions!

Special Offer for Summer 2015: Classics of Desoldering

Summer Offer 2015: The classics of desoldering

As summer is coming, the outdoor theatres put on stage the classic plays and we offer your the Classics of Desoldering.

Although the widespread of through-hole technology had decreased, the desoldering of such joint is still a challenge: beyond reflowing the solder, you need to remove it as well. If you use a traditional soldering iron, a manual desoldering pump will surely help you. Now you may get the Hakko SPPON 18G and 20G pumps for a special price.

If you have larger volumes to desolder, when workin on a bench, you will need a benchtop desoldering system. The legendary Hakko 474 shows all the features that brought Hakko into a market leader position: reliability and efficiency. In case you deal with on-site operation, for example in a larger equipment, you will surely like the Hakko FR-300 compact desoldering gun, that will allow you to perform the operation even with one hand.

Just call us or check in at our webshop. The offer is valid until the stocks last!

Antistatic Trays and Boxes

Antistatic Trays and Boxes

As a new product line in our range, we proudly offer you antistatic trays and storage boxes, made of conductive plastic (with a surface resistivity of 104 – 106 Ω).

We can provide these products in various sizes, manufactured of raw sheets of 0.8 mm, 1.3 mm, 1.8 mm and 3.0 mm thickness, in various standard and custom sizes, with or without lids, to best fulfil our customers’ needs.

The raw sheets used for these products are top quality and the products are supplied with a quality certificate.

Due to the local manufacturing base, we may provide these tray and boxes customized for the needs of your particular products, with a short lead time. In addition to this, our direct contact with the manufacturer ensures maximum flexibility and competitive pricing.

In case you need detailed information, please, don’t hesitate to contact our company.


New Hakko Catalogue

Hakko Catalogue 2015As a proof of the continuous renewal of the word leading product range, Hakko had isseued its Product Catalogue for the European market, with all available products, as of February, 2015.  You may download this booklet from the “Downloads” section of the Hakko Hungary website. Should you prefer a hard copy, please contact our office.

Sakura: Hakko Special Spring Offer

Hakko Special Spring Offer

Hakko Special Spring Offer

Sakura: the traditional cherry blossom festivity is perhaps one of the most important events in the life of Japan, symbolizing the ethernal renewal of the nature. Renewal is also a fundamental term if we look at the excellent products of the Japanese industry: the Hakko soldering systems, aiming year by year to offer innovative products for those involved in professional hand soldering.

Dedicated to this wonderful spring event, we had decided to launch our Hakko Special Spring Offer: you may get an FX-888D digital soldering system for only EUR 105.- (excl. VAT), and also a free ESD wrist strap, very useful when you need to work with delicate electronic components.

Don’t hesitate: place the order now, directly at our office, or through our webshop and claim your FX-888D for the bargain price of EUR 105.- and you will receive your soldering system in a few days, together with a FREE ESD wrist strap.

Hakkoshop Spring offer

Floor marking tapes from Pro-Forelle Bt

As part of the continuous enhancement of our offer, we had introduced a new product range that may be beneficial for our customers: the high quality, yet cost-effective self-adhesive floor marking tapes.

Floor-marking-tape 880x400pxThe long-life floor marking tapes are the right solution, when you need to mark the distinct areas of your production floor, the aisles in your warehouse, or you want a visual warning for some dangerous steps. We can supply you these products for an attractive price and with short lead times.

The typical size of a roll is 50 mm x 33 m, but if requested, we can provide different width as well. However, for such special products – as being manufactured on request – the lead time may be slightly longer.

As most of our customers are working in the field of electronic assembly, the special marking tapes with the standard signs, showing the borders of the electrostatically protected area, are also part of of the range. Contact us for a quotation!

Using floor marking tapes

Hakko FR-300 desoldering tool for special introductory price

The new Hakko FR-300 desoldering tool is mainly intended for on-site maintenance and repair applications, such as replacing a thru-hole mounted connector in a bigger device, when it’s not possible to separate and take to the workshop the electronic board containing it.

HakkoShop wishes to facilitate the launch of this new, handy tool by offering it for a special introductory price of €239. This offer is valid until the 31st of  December, 2014. You will get the tool in plastic carrying case, including a 1 mm diameter desoldering nozzle, a workstand, spare filters and accessories for cleaning the nozzle and the heater. Just one click, and you may have your new Hakko FR-300!

Hakko FR-300 special offer



Our Webshop is on-line!

Hakkoshop webshop is on-line!

Our countdown to the launch of our webshop has finally reached zero, and yes, HakkoShop is on-line now! You may have access to the comprehensive range of the Hakko products through this handy site.

The webshop is mainly supporting the customers from Hungary and, beyond that, from other countries from the European Union that doesn’t have a local authorized Hakko distributor. If you are from a country having a local distributor, we encourage you to contact them with your inquiries: they can surely provide you the best support. However, our shop is opened for everyone. In case you are not located in the EU, we kindly ask you to contact us by e-mail or phone – or through the contact form that you find on the “Contact” section of this site –, as the terms and conditions may vary for each country, but we are committed to find the best way to help you.

Obviously, launching the webshop means only the end of the first stage of this project, but altogether, it’s more a beginning, rather than an end. There are still several steps on our roadmap, intended to enhance our presence on the internet and to facilitate your access to our product range. We will keep you informed through all of our channels, including this News section, about the changes, extensions and improvements. You may help us through this road, but sending us any feedback that may contribute in improving our processes. We really need and appreciate your help!


Our Webshop Opening Soon!

Hakkoshop ver2

Our customers will soon be able to enjoy the possibility of finding and purchasing our product range on a new platform: as shown by the countdown from the right side of the screen, on the 1st of October 2014 we will open our webshop for the Hakko products, at www.hakkoshop.eu. We are aiming to offer better access for the customers from Hungary and from other European coutries to the word leader soldering products. Beyond Hakko, we will include in our offer othe successful products from our range, like hand tools or ESD protection equipment.

The list of the products is not closed and we don’t ever want to close. We will work continuously on extending, improving and optimizing our offer, to be able to supply the most popular items from our stocks. As concerning the products showing a lower demand, we will supply based on pre-orders.

As our target is to gain a regional position for our business, the shop will be available from the very beginning in more languages, English and German, besides Hungarian, and the prices will be shown in Hungarian Forints and Euros as well.

This is a new and exciting experience for us and, of course, it cannot be successful without our customers’ satifaction. Therefore we really appreciate any feedback, comment, suggestion from you, that may contribute to the success of this project.